Store container at room temperature (18° to 26° C) prior to opening. If desired, 10X PBS pH 7.2 with Azide may be stored at 4° C or less. Some salts may precipitate out of solution at lower temperature. Allow buffer to equilibrate to room temperature (18° to 26° C) to restore solubility of some salts.
10X PBS pH 7.2 with Azide (0.2 M Potassium Phosphate 1.5 M Sodium Chloride 0.1% (w/v) Sodium Azide) is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer consists of 0.2 M Potassium Phosphate, 1.5 M Sodium Chloride and 0.1% (w/v) Sodium Azide at a pH of 7.2. 10X PBS pH 7.2 with Azide (0.2 M Potassium Phosphate 1.5 M Sodium Chloride 0.1% (w/v) Sodium Azide) is meticulously prepared using ultra pure reagents dissolved in highly polished pharmaceutical grade deionized water.
10X PBS pH 7.2 with Azide (0.2 M Potassium Phosphate 1.5 M Sodium Chloride 0.1% (w/v) Sodium Azide) was aseptically filtered through a Millipore 0.22 micron filter into clean, pre-sterilized containers. 10X PBS pH 7.2 with Azide (0.2 M Potassium Phosphate 1.5 M Sodium Chloride 0.1% (w/v) Sodium Azide) was tested on trypticase soy agar for 24 hours, 48 hours and 72 hours and was found to be negative for bacteria.
This product is for research use only and is not intended for therapeutic or diagnostic applications. Please contact a technical service representative for more information. All products of animal origin manufactured by Rockland Immunochemicals are derived from starting materials of North American origin. Collection was performed in United States Department of Agriculture (USDA) inspected facilities and all materials have been inspected and certified to be free of disease and suitable for exportation. All properties listed are typical characteristics and are not specifications. All suggestions and data are offered in good faith but without guarantee as conditions and methods of use of our products are beyond our control. All claims must be made within 30 days following the date of delivery. The prospective user must determine the suitability of our materials before adopting them on a commercial scale. Suggested uses of our products are not recommendations to use our products in violation of any patent or as a license under any patent of Rockland Immunochemicals, Inc. If you require a commercial license to use this material and do not have one, then return this material, unopened to: Rockland Inc., P.O. BOX 326, Gilbertsville, Pennsylvania, USA.
